Cover Me Tarps and Canopies
Frame Tent Manufacturing
Providing temporary shelter from sun & rain
|Lay out fixtures & tubing and slide top frame together Washer will be on inside .||Straight side runs parallel to the ground while the curved part goes to the leg and up to the peak.||Bungee Tarp to the frame|
|For Valance Canopies the rope and ball go on the side going up to the peak||For valance Canopies the ball should be down to allow the valance to lay over the frame properly||Raise up one side & insert
Repeat on opposite side.
|The 78 inch leg height is only a recommended height and this can vary if you like. The 118 inch tubing makes the length and the tubing running up to the peak will vary depending on the width of canopy purchased
Be sure to secure the unit to the ground and canopy should be taken down in heavy winds
Economy Canopy valance Canopy Pop-up Canopy Vendor Canopy Snap Button Canopies
Heavy Duty Poly Tarps Light Weight poly tarps
Join our mailing list and recieve specials, promotions, new product information, discount coupons & more.
Copyright 2002-2009 Cover Me Tarps & Canopies Inc. © All Rights Reserved.